Dass Slotted Track System

DASS slotted track is designed to accommodate wall deflection in both loadbearing and non-loadbearing applications. Slotted track leg height is 2-1/2” and allows for deflection through its pre-punched 1-1/2” slots along both flanges of the track. The slots are spaced at 1” on center to allow for maximum flexibility. The slotted track is fast and economical reducing labor cost and material required while accommodating deflection requirements in virtually all applications.

WEB:              2-1/2” 3-5/8” 6” 8” 10” and 12” Widths

Thicknesses: 25 gauge to 12 gauge

Please contact us for your specific project requirements to determine which product meets your design requirements.

STANDARD WEB SIZES

2 1/2″
3 5/8″
6″
8″
10″
12″

FLANGE SIZES

1 1/4″
1 5/8″
2″
2 1/2″
DESIGNATION THICKNESS (MILS)MINIMUM THICKNESS (IN)DESIGN THICKNESS(MM)GALVANIZED COATINGGAUGE REFERENCE ONLY
180.01790.0188G4025 GA
330.03290.0346G6020 GA
430.04280.0451G6018 GA
540.05380.0566G6016 GA
680.06770.0713G6014 GA
970.09660.1017G6012 GA
  • ASTM 1003   Standard specification for steel sheet coated and metallic coated for cold-formed framing members
  • ASTM A653   Standard specification for steel sheet zinc-coated (galvanized) by the hot-dip process
  • ASTM A792   Standard specification for zinc-coated steel by the hot-dipped process
  • ASTM C645 Standard specification for non-structural steel framing members
  • ASTM C754   Standard specification for the installation of steel framing members
  • ASTM C1047 Standard specification for trims and accessories